ML MOTORS

i

DC square cage motors

DC motors ML series have been designed to meet all the industrial application requirements, which ask for machines with adjustable speed and torque in a wide and precise field. All motors have completely laminated square stators and use high quality and high efficiency magnetic lamination, with low losses.

Specification

  • Winding coils insulation: class F according to CEI EN 60034-1
  • Thermal dimensioning: class F according to CEI EN 60034-1
  • Protection degree: IP23 according to CEI EN 60034-5
  • Cooling: IC 06 (for motor IP23) according to CEI EN 60034-6
  • Balancing degree: G 2,5 according to ISO 1940-1 (1993) (half-key balancing for key shafts according to CEI 2-23)
  • Mounting arrangement: IM B5 e IMB35 (IM3001)
  • Lubricated for life ball bearings
  • Thermal protection: thermal cut-out with normally closed contact. Operating temperature 130°C±5°C. (Maximum voltage 250Vac, maximum current 6Aac)
  • Color: Blue RAl 5010
  • Reference conditions: environment +40°C, max. height 1000m above sea level.
  • Storage temperature: -20°C ÷ +70°C

Options

  • Holding brake
  • Shaft without key
  • Roller bearing(starting from size ML100)
  • Single-phase voltage fan for ML71, ML80, ML100
  • Oil seal(Not available for all sizes. It is assembled only when the coupling is oil-bath lubricated)
  • Box on thge right, on the top or on the left.(Till size ML132. For bigger sizes contact our technical department)
  • Special design on customer's specifications

 

ML 71 - ML80

Specification

  • Power:
    • from 0.48 to 5.5 kW
  • Torque:
    • up to 17.5 Nm
  • Standard shaft:
    • ML71 = 19/24
    • ML80 = 24/28 mm
  • Square flange dimension:
    • ML71 = B5 F130
    • ML80 = B5 F165

Motori ML100 - ML112

Caratteristiche

  • Power:
    • from 2.94 to 29.5 kW
  • Torque:
    • from 28 to 93.5 Nm
  • Standard shaft:
    • 28 / 32 / 38 mm
  • Square flange dimension:
    • B5 F215

Motori ML132

Caratteristiche

  • Power:
    • ML132S: from 12.9 to 52,8 kW
    • ML132M: from 11.4 to 48 kW
    • ML132L: from 13 to 54 kW
    • ML132P: from 10.4 to 59.5 kW
  • Torque: from 119 Nm to 146 Nm
    • ML132S: from 119 to 132 Nm
    • ML132M: from 133 to 159 Nm
    • ML132L: from 140 to 187 Nm
    • ML132P: from 175 to 210 Nm
  • Standard shaft:
    • 38 / 42 / 48 mm
  • Square flange dimension:
    • B5/F265

Motori taglia da ML160 a ML450

Caratteristiche

  • Power:
    • from 16 to 470 kW
  • Torque:
    • from 270 to 3000 Nm

Download